This is Häfele's own photo.
Parallel Shelf Pins, for Parallel Rod Wine Storage
Black
Spring-loaded to allow the quick and easy installation of the parallel rods into standard 5 mm shelf pin holes. Material: ABS Plastic. Load bearing capacity: 9 lbs. Installation: The parallel rod should be cut 22 mm (7/8") shorter than the interior dimensions of the casework sidewall. Supplied with: 30 pcs. Each parallel shelf pin (PSP) has a spring that slips over the spline. Insert the spline into the Parallel Rod on each end. The shelf pin compresses into the Parallel Rod allowing the rod to fit snugly between the interior casework sidewalls. To install a Parallel Rod into interior casework, fit the spring onto the spline of the PSP and insert it into the ends of the Parallel Rods. Insert one end of the rod into a 5 mm shelf hole, then push the rod against the side wall to compress the spring. At the same time, compress the other PSP by hand while you align the opposite shelf pin hole, releasing the pressure as the hardware pin springs expand against the casework sidewalls. The Parallel Rod is now securely held into place.
Each.
What it fits
Tell us the cabinet and we will check the fit before you order.
- The parallel rod should be cut 22 mm (7/8") shorter than the interior dimensions of the casework sidewall.
Measure inside the cabinet opening, then compare it with the opening it needs.
What it needs
Needed.Two parallel shelf pins are required for each parallel rod.
Goes with it, sold separately: Wine Storage Parallel Rods.
What you are getting
- Checked against our cabinets, so you know before you buy what it fits
- About a week to get here
- We can put it in when we install your cabinets